Hongfa Steel Structure Mats. Co., Ltd.
Pay Attenion Please : Raw Materail cost is going up again, please make some inquiry before you placing the orders.
Add to Cart
Thermal Insulation Low Carbon CRC Cold Rolled Steel Coil Sheet For Appliances
Description:
Cold Rolled Steel is a mill product made with a high degree of gauge accuracy and uniformity of physical characteristics. The smooth deoxidized matte finish gives an excellent base for paint, lacquer and enamel. Box annealing and absence of scale permit stamping and moderate drawing operations. Sheets bend flat on themselves without cracking. Oiling protects Surface against rust.
The application of surface oil to cold rolled steel sheet is intended to provide protection from corrosion ("rusting") during shipment and warehousing. Because cold rolled steel sheet is prone to rusting, standard practice is to apply a rust-preventative oil at the exit end of the temper mill (the last processing step). Rust-preventative oils are different than forming lubricants in that they contain special corrosion-inhibiting additions. In addition to the oil, Wangfa Steel maintains clean, dry environments in climate controlled warehouses at all its facilities to ensure our coils and sheets arrive to you in prime condition.
Cold rolled sheet products have been available for many, many years, and have been successfully used for a multitude of applications. Today's cold rolled sheet products are much improved over those used in the past. They offer better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end use applications.
Specification:
| Standard: | JIS/DIN/GB | |
| Grade: | SPCC /SPCE /SPCE | |
| Size: | Thickness: | 0.12-2.5mm |
| Width: | ≤ 1250mm | |
| Length: | Coil or client’s requirements | |
| Surface: | bright / black | |
| Treat: | Oiled or dry | |
| Coil ID: | 508 /610mm | |
| Coil Weight: | 3-10 Tons | |
| Type : | coil or sheets | |
Chemical Composition
| Grades | chemical composition % | ||||||
| C | Mn | P | S | An | Aita | Tib | |
| SPCC | ≤0.12 | ≤0.50 | ≤0.035 | ≤0.025 | ≥0.020 | - | - |
| SPCD | ≤0.10 | ≤0.45 | ≤0.030 | ≤0.025 | ≥0.020 | - | - |
| SPCE,SPCEN | ≤0.08 | ≤0.40 | ≤0.025 | ≤0.020 | ≥0.020 | - | - |
| DC01(St12) | ≤0.10 | ≤0.50 | ≤0.035 | ≤0.025 | - | ≥0.020 | - |
| DC03(St13) | ≤0.08 | ≤0.45 | ≤0.030 | ≤0.025 | - | ≥0.020 | - |
| DC04(St14,St15) | ≤0.08 | ≤0.40 | ≤0.025 | ≤0.020 | - | ≥0.020 | - |
| DC05(BSC2) | ≤0.008 | ≤0.30 | ≤0.020 | ≤0.020 | - | ≥0.015 | ≤0.20 |
| DC06(St16,St14-T,BSC3) | ≤0.006 | ≤0.30 | ≤0.020 | ≤0.020 | - | ≥0.015 | ≤0.20 |
A:For grades DC01,DC03 & DC04,if the C≤0.01 then Ait≥0.015.
B:Nb content can combined to Ti content,and total content of Nb & Ti should ≤0.20.
Surface Quality
| Rank | Code | Features |
| More senior finished surface | FB(03) | Surface allow to have small amount defect that does not effect adhesive force of coating and plating,like light graze,indentation,spot,ragging mark,oxidation color, etc |
| High finished surface | FC(04) |
|
| High finished surface | FD(05) |
|
Strip Thickness Deviation
| Specified Min. Yield Strength (Mpa) | Thickness (mm) | Thickness Tolerance(mm) | |||||
| General accuracy PT.A | High accuracy PT.B | ||||||
| Width(mm) | Width(mm) | ||||||
| ＜1200 | 1200-＜1500 | ＞1500 | ＜1200 | 1200-＜1500 | ＞1500 | ||
| ＜280 | 0.30-0.40 | ±0.04 | ±0.05 | - | ±0.025 | ±0.035 | - |
| ＞0.40-0.60 | ±0.05 | ±0.06 | ±0.07 | ±0.035 | ±0.045 | ±0.05 | |
| ＞0.60-0.80 | ±0.06 | ±0.07 | ±0.08 | ±0.045 | ±0.05 | ±0.05 | |
| ＞0.80-1.00 | ±0.07 | ±0.08 | ±0.09 | ±0.05 | ±0.06 | ±0.06 | |
| ＞1.00-1.20 | ±0.08 | ±0.09 | ±0.10 | ±0.06 | ±0.07 | ±0.07 | |
| ＞1.20-1.60 | ±0.10 | ±0.11 | ±0.11 | ±0.07 | ±0.08 | ±0.08 | |
| ＞1.60-2.00 | ±0.12 | ±0.13 | ±0.13 | ±0.08 | ±0.09 | ±0.09 | |
| ＞2.00-2.50 | ±0.14 | ±0.15 | ±0.15 | ±0.10 | ±0.11 | ±0.11 | |
| ＞2.50-3.00 | ±0.16 | ±0.17 | ±0.17 | ±0.11 | ±0.12 | ±0.12 | |
| ＞3.00-3.50 | ±0.17 | ±0.19 | ±0.19 | ±0.14 | ±0.15 | ±0.15 | |
| 280-＜360 | 0.30-0.40 | ±0.05 | ±0.06 | - | ±0.03 | ±0.04 | - |
| ＞0.40-0.60 | ±0.06 | ±0.07 | ±0.08 | ±0.04 | ±0.05 | ±0.06 | |
| ＞0.60-0.80 | ±0.07 | ±0.08 | ±0.10 | ±0.05 | ±0.06 | ±0.06 | |
| ＞0.80-1.00 | ±0.08 | ±0.10 | ±0.11 | ±0.06 | ±0.07 | ±0.07 | |
| ＞1.00-1.20 | ±0.10 | ±0.11 | ±0.12 | ±0.07 | ±0.08 | ±0.08 | |
| ＞1.20-1.60 | ±0.12 | ±0.13 | ±0.13 | ±0.08 | ±0.10 | ±0.10 | |
| ＞1.60-2.00 | ±0.14 | ±0.16 | ±0.16 | ±0.10 | ±0.11 | ±0.11 | |
| ＞2.00-2.50 | ±0.17 | ±0.18 | ±0.18 | ±0.12 | ±0.13 | ±0.13 | |
| ＞2.50-3.00 | ±0.19 | ±0.20 | ±0.20 | ±0.13 | ±0.14 | ±0.14 | |
| ＞3.00-3.50 | ±0.20 | ±0.23 | ±0.23 | ±0.17 | ±0.18 | ±0.18 | |
| ＞360 | 0.30-0.40 | ±0.06 | ±0.07 | - | ±0.04 | ±0.05 | - |
| ＞0.40-0.60 | ±0.07 | ±0.08 | ±0.10 | ±0.05 | ±0.06 | ±0.07 | |
| ＞0.60-0.80 | ±0.08 | ±0.10 | ±0.11 | ±0.06 | ±0.07 | ±0.07 | |
| ＞0.80-1.00 | ±0.10 | ±0.11 | ±0.13 | ±0.07 | ±0.08 | ±0.08 | |
| ＞1.00-1.20 | ±0.11 | ±0.13 | ±0.14 | ±0.08 | ±0.10 | ±0.10 | |
| ＞1.20-1.60 | ±0.14 | ±0.16 | ±0.16 | ±0.10 | ±0.11 | ±0.11 | |
| ＞1.60-2.00 | ±0.17 | ±0.18 | ±0.18 | ±0.11 | ±0.13 | ±0.13 | |
| ＞2.00-2.50 | ±0.20 | ±0.21 | ±0.21 | ±0.14 | ±0.15 | ±0.15 | |
| ＞2.50-3.00 | ±0.23 | ±0.24 | ±0.24 | ±0.15 | ±0.17 | ±0.17 | |
| ＞3.00-3.50 | ±0.24 | ±0.27 | ±0.27 | ±0.20 | ±0.21 | ±0.21 | |
Cold rolled sheet steel products are used in a wide variety of end applications such as appliances, automobiles, exposed as well as unexposed parts, electric motors, plumbing fixtures, drum manufacturing, shelving, furniture, doors, toolboxes, tubing products, unexposed construction products, as well as many other areas of manufacturing.
